Cookie Img

Oil Cooled Digital Servo Stabilizer

Oil Cooled Digital Servo Stabilizer
Oil Cooled Digital Servo Stabilizer
Product Code : DSS
50,000 INR
Price And Quantity
Minimum Order Quantity :
Unit of Measure :
Price :
50,000 INR
Product Specifications
Rated Power :
25 kva
Display :
Ambient Temperature :
40 Celsius (oC)
Output Voltage :
230 Volt (V)
Voltage Protection :
Current Type :
Waveform Distortion :
Product Type :
Servo voltage stabilizer
Efficiency :
Frequency (MHz) :
50 Hertz (HZ)
Input Voltage :
300-470 Volt (V)
Insulation Resistance :
5 Mohm
Usage :
Phase :
Three Phase
Current :
Weight :
150 Kilograms (kg)
Warranty :
One Year
Product Description

We are a well established manufacturer of Oil Cooled Digital Servo Stabilizer for our highly honoured clients. It is used to prevent malfunction in several equipment. It is installed with latest digital micro processors controllers for constant output voltage. Due to its output voltage stability, this stabilizer allows the optimum drawing of the current without high consumption of power. Oil Cooled Digital Servo Stabilizer helps in reducing the breakdown and the cost maintenance in several industries, offices and domestic applications.

Technical Specification


Confirming to latest IS:9815 and ISO 9001-2008 standard.


01 KVA-300 KVA single phase.
03 KVA -3000 KVA three phase.

Input Voltage

Single phase (90 v-270 v, 140 v-280 v, 160 v-260 v )
Three phase (150 v-460 v, 250 v-460 v, 270 v-460 v )

Output Voltage

Single phase (220 v/230 v/240 v +/- 1% ).
Three phase ( 380 v/400 v/415 v +/- 2% ).

Wave Form Distortion


Response Time

10 m. Sec

Correction Method

Stepless correction using variable transfer

Control Circuit

Fully automatic IC based solid state

Input Frequency

45-55 Hz


Natural air / oil


Better than 98 %

Duty Cycle



Auto / Manual

No Load Loss

Less than 1 %


Suitable for 3 phase unbalanced/balanced supply, unbalanced/balanced loads

Operating Temperature

-15°c to 50°c

Additional Facility

Step down / isolations

Compatibility to

Specially designed control card for faithful

DG Set

Operation on mains as well as DG set.

Control Panel

Power on indicator, low /high input indicator, auto/manual selector switch, push switches to adjust output voltage in manual mode, selector switch to monitor input/output voltage with in 5 % of the set output voltage, volt meter to indicator output/input voltage.

Transformers & Variac Earthing

Are Wound with Conductive Grade copper of 99.9% purity. Low loss CRGO lamination is used to increased over all efficiency. This reduces energy losses and hence saves electricity

High Voltage

With stands 2. 5 KV for power transformer


Better than 6 m ohms because of wound


Components being baked in the oven at 110 °c after vacuum impregnation

Contact Us

36A, Lane no.-03, Rajender Nagar Industrial Area-2, Mohannagar, Ghaziabad, Uttar Pradesh, 201007, India
Phone :+917042386227