Three Phase Oil Cooled Servo Voltage Stabilizer

Three Phase Oil Cooled Servo Voltage Stabilizer
Three Phase Oil Cooled Servo Voltage Stabilizer
Price And Quantity
  • Piece/Pieces
  • 1
  • Piece/Pieces
  • 5500 INR
    Product Description

    Leveraging on our state-of-the-art infrastructural unit, we have been a proud manufacturer of Three Phase Oil Cooled Servo Voltage Stabilizer for our highly valued clients. This is installed with different electronic devices for controlling fluctuating voltage outputs. Our ingenious personnel make use of optimum quality components and latest technology for fabricating this regulator in tandem with the internationally laid standards and norms. Three Phase Oil Cooled Servo Voltage Stabilizer is available in varied capacities and technical specifications at pocket friendly prices.

    Key Features:

    • Long operational life
    • Sturdiness
    • Corrosion resistance
    • Hassle free performance

    Product Details:




    Three Phase

    Input Voltage

    480 V


    Cast Iron

    Control Type

    Relay controller

    Cooling Type

    Oil cooled

    Technical Specification


    Confirming to latest IS:9815 and ISO 9001-2008 standard.


    01 KVA-300 KVA single phase.
    03 KVA -3000 KVA three phase.

    Input Voltage

    Single phase (90 v-270 v, 140 v-280 v, 160 v-260 v )
    Three phase (150 v-460 v, 250 v-460 v, 270 v-460 v )

    Output Voltage

    Single phase (220 v/230 v/240 v +/- 1% ).
    Three phase ( 380 v/400 v/415 v +/- 2% ).

    Wave Form Distortion


    Response Time

    10 m. Sec

    Correction Method

    Stepless correction using variable transfer

    Control Circuit

    Fully automatic IC based solid state

    Input Frequency

    45-55 Hz


    Natural air / oil


    Better than 98 %

    Duty Cycle



    Auto / Manual

    No Load Loss

    Less than 1 %


    Suitable for 3 phase unbalanced/balanced supply, unbalanced/balanced loads

    Operating Temperature

    -15°c to 50°c

    Additional Facility

    Step down/isolations

    Compatibility to

    Specially designed control card for faithful

    DG Set

    Operation on mains as well as DG set.

    Control Panel

    Power on indicator, low /high input indicator, auto/manual selector switch, push switches to adjust output voltage in manual mode, selector switch to monitor input/output voltage with in 5 % of the set output voltage, volt meter to indicator output/input voltage.

    Transformers & Variac Earthing

    Are Wound with Conductive Grade copper of 99.9% purity. Low loss CRGO lamination is used to increased over all efficiency. This reduces energy losses and hence saves electricity

    High Voltage

    With stands 2. 5 KV for power transformer


    Better than 6 m ohms because of wound


    Components being baked in the oven at 110°c after vacuum impregnation

    Trade Information
    • 10 Per Day
    • 2 Days
      Contact Us

      36A, Lane no.-03, Rajender Nagar Industrial Area-2, Mohannagar, Ghaziabad, Uttar Pradesh, 201007, India